TDZ, located  in Zaragoza and Toledo, (Spain), have been manufacturing equipment for the automotive sector and industrial machinery since 1939. We are proud to celebrate our 80th Anniversary during 2019.

Its beginnings as a producer of injection pumps for the most important industrial vehicle manufacturers, (Mercedes Benz, Robert Bosch, G.M., Case, etc…) provided  TDZ with the required human and technical capital to create in the 60’s the first hydraulic pump plant.

Currently,  TDZ products can be found in more than 100 countries over five continents through our network of distributors, customers and OEM’s.

Bezares: Hydraulic systems - TDZ Vane Pumps

Bezares, S.A. and TDZ Hydraulics, S.A. have been collaborating for many years sharing technology. In August 2010, Bezares S.A. acquired all TDZ assets, such as Machinery, Inventory, Designs and Customer Portfolio to continue with the TDZ production.

Vane Pumps and Motors

TDZ vane pumps and motors are manufactured in a wide  range of  displacements,  from 3 c.c./rev. to 269 c.c./rev for single pumps and hundreds of flow combinations for double and triple pumps.

All TDZ pumps have a low power to weight ratio, high efficiency, low noise level and ease of maintenance.

Ease of maintenance is achieved by the pump design, where the working components  are contained within a cartridge which can quickly and easily be replaced without disconnecting the pump from the prime mover.

TDZ  vane pumps  are hydraulically  balanced, reducing wear and eliminating bearing loads from within the pump. The option  to rotate the outlet port in relation to the inlet port provides flexibility and easy installation. Depending  on the application,  there are two versions: low noise industrial and mobile application models.

TYPESERIESDisplacement
(CC/rev or Gal at 1200RPM)
Max. Speed
(r.p.m.)
Max. Pressure
(bar)
TDZ Design
Single Vane Pump
BHP12,… 7 (cc)2500175
TDZ Design
Single Vane Pump
BHP4, BHP6, BHP726,…235 (cc)2500210
Denison design
Single Vane Pump (Very high pressure)
T7B6,…52 (cc)2800320
Denison Design Single Vane PumpT6C, T6D, T6E11,…270 (cc)2800275
Denison Design Double Vane Pump (Very high pressure)T7BB, T67CB,T67DB T67EB9,…270 (cc)2800320
Denison Design Double Vane PumpT6CC, T6DC, T6EC, T6ED11,…270 (cc)2800275
Denison Design Triple Vane Pump (Very high pressure)T67DBB, T67EDB9,…270 (cc)2800320
Denison Design Triple Vane PumpT6DCC, T6EDC11,…270 (cc)2800275
Vickers Design Single Vane PumpV10, V201,… 13 (Gal)4800175
Vickers Design Single Vane Pump20V*, 25V*, 35V*, 45V*2,… 72 (Gal)2500210
Vickers Design Double Vane Pump2520V*, 3520V*, 3525V*2,… 45 (Gal)2500210
Vickers Design Double Vane Pump4520V*, 4525V*, 4535V*2,…72 (Gal)2500210
Vickers Design Thru DriveVane Pump25VT*, 35VT*,45VT*8,… 72 (Gal)2500210
wdt_IDBezares (TDZ) Part NumberVickers' equivalent Part Number
1V000106VVP1-20-RRMM-30-CBK-10
2VV25S01VV25 WITHOUT CARTRIDGES SHAFT 1
3VV43S01VV43 WITHOUT CARTRIDGES SHAFT 1
4VV45S01VV45 WITHOUT CARTRIDGE SHAFT 1
5VTM4201VTM42/604520NOR114
6VTM4261VTM42/607017MFR1
7VTM4260VTM42/506517MAR1
8VTM4202VTM42/504520NOR114
9VTM4282VTM42/407517 F11 1
10VTM4280VTM42/406015F11R1
11VTM4303VTM42/404015NOL114
12VTM4203VTM42/404015NOR114
13VTM4263VTM42/404017MAL1
14VTM4281VTM42/404015F11R1
15VTM4304VTM42/403010F07R1
16VTM4205VTM42/403015NOL114
17VS7TC12VST7C/57D86A - THRU DRIVE
18VTM4204VTM42/202015NOR114
19VS7TC08VS7TC/67D86AA - THRU DRIVE
20VS7TC11VS7TC/60D86CB - THRU DRIVE
21VS7TC16VS7TC/60D86DA - THRU DRIVE
22VS7TC14/BWVS7TC/60DJA - THRU DRIVE
23VS7TC18VS7TC/60Y86AA
24VS7TC01VS7TC/60D86CA - THRU DRIVE
25VS7TC17VS7TC/47D86DC- THRU DRIVE
Bezares (TDZ) Part NumberVickers' equivalent Part Number

Necessary Information to choose a replacement cartridge: Pump’s rotation and if the cartridge kit is mounted in a single or double pump, (front body or rear cover cartridge kit).

Shafts -Seal kits and shaft seals – Miscellaneous Parts

• Keyed and splined for single, double, triple and thru drive pumps
• Seal kits and shaft seals for single, double, triple & thru drive pumps
• T6, T7, V and VQ series
• NBR & Viton seal kits and shaft seals (ask for different seal materials)
• Primary and secondary shaft seals
• Front body, inlet housing, rear cover, housing bolts, (4 units required), flex plates, bearings, etc…
For single, double, triple,and thru drive pumps.

Replacement CartridgeGallons @ 1200RPM
For Vickers 20V / 20VQ5, 8, 9, 11, 12, 14
For Vickers 25V / 25VQ8, 12, 14, 17, 19, 21, 24
For Vickers 30V / 30VQ24, 28
For Vickers 35V / 35VQ21, 25, 30, 35, 38, 45
For Vickers 45V / 45VQ42, 47, 50, 57, 60, 67, 75
For Denison T7B2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 14, 15
For Denison T6C3, 5, 6, 8, 10, 12, 14, 17,20, 22, 25, 28, 31
For Denison T6D14, 20, 24, 28, 31, 35, 38, 42, 45, 50, 61
For Denison T6E42, 45, 50, 52, 62, 66, 72, 85
TYPESERIESDisp.
(CC/rev or
Gal at
1200RPM)
Max. Speed
(r.p.m.)
Max. Pressure
(bar)
SingleMH4D52,… 115 (cc)3000210
SingleM4C25,… 100 (cc)3600210

CETOP Valves

CETOP Valves

TDZ directional  control,  pressure  control  and flow control valves offer you the flexibility to make your system  operates  the way you need it to operate.

With a wide array of CETOP valve styles and operating capabilities at your selection, TDZ valves maximize the control of your system through various valve combinations limited only by your imagination.

The versatility  of designs, and the flexibility of various porting, spool action and circuit options, are just a few of the fundamental benefits you will find with TDZ valves.

Covered in our range is a full selection of CETOP modular  valves, (check  valves, flow control, pressure control, etc…) as well as a complete line of directional control valves in CETOP 3, 5, 7, 8 and 10 operated via AC/DC voltages.

CETOP valves and manifolds catalog – TDZ
CETOP valves and manifolds catalog – TDZ

Solenoid Directional Control Valves

Max. Pressure350 bar, (5000 psi)
Max flowISO 03, (CETOP 3): 80 (31) l/min. (GPM)
ISO 05, (CETOP 5): 120 (50) l/min. (GPM)
RemarksOptional terminal box, DIN plug-in connector,
any worldwide current and frequency
are available upon request.

Pilot Operated Directional Control Valves

Max. Pressure315 bar, (4500 psi)
Max flowISO 07, (CETOP 7): 300 (80), l/min (GPM)
ISO 08, (CETOP 8): 500 (132), l/min. (GPM)
ISO 10, (CETOP 10): 1100 (290), l/min (GPM)

Check Valves

Pilot operated check valves

Modular Systems & CETOP Valves

Max. Pressure210 bar, (3000 psi)
Max flow70 l.p.m., (20 GPM)
Port Size1/4”, 3/8”
Model• Modular Relief Valve,
• Modular Pressure Reducing Valve,
• Modular Throttle Valve,
• Modular Throttle and Check Valve,
• Modular Check Valve,
• Modular Pilot Check Valve,
• Modular Solenoid Check Valve,
• Multi-station manifold Blocks,
• Modular sub-plates.
Compartilhe esta página